Powersoft Duecanali 4804 Förstärkare
4800W/2-kanals flexibel förstärkare
Kontakta en produktexpert om denna produkt

Duecanali 4804-förstärkarplattformen är idealisk för medelstora till stora installationer som kräver hög effekt för att driva subar och flera högtalare. Det erbjuder Powersofts kända tillförlitlighet och stark effekt i en lätt, kompakt enhet.
MyPowersoft-tjänster finns tillgängliga för denna produkt
Power supply
Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:Ac protection: shut down power supply when AC mains voltage is outside the operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continuous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behavior
General
Fixed frequency switchmode output stage for high-grade sound accuracy
Compact size - all models only 1 RU for reduced rack cost and space
Lightweight - for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel
Loudspeaker system configuration
Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
Switchable 35Hz / 70Hz high pass filter per channel
Mixed configuration with Lo-Z/Hi-Z systems possible
Bridged mode low impedance per channel pair
Alarms and GPI/O
NC/NO contacts per channel for alarm notifications
Remote ON/OFF switch
Remote VCA control per channel
Remote Control & Monitoring
Via Software:
Attenuation (from 0 dB to 26 dB)
Max output voltage
Output and gain reduction metering
Diagnostics (temperature, fans, …)
Via Hardware:
Attenuation (from 0 dB to 26 dB)
High Pass Filter (35 Hz, 70 Hz)
LoZ/HiZ/70V/100V output selection
Gain (from 26 dB to 35 dB)
GENERAL | |||
Output power per Channel | |||
Output power per Channel | 3000 W @ 2 Ω | 2400 W @ 4 Ω | 1250 W @ 8 Ω |
Bridge mode | 6000 W @ 4 Ω | 4800 W @ 8 Ω | |
Max output voltage / current | |||
Max unclipped output voltage@8 Ω | 142 Vpeak | ||
Current | 80 Apeak | ||
AC MAIN POWER | |||
Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
Operating voltage | 60 V – 264 V | ||
Power consumption / current draw | |||
Idle | 115 V: 30.3 W – 0.34 A | 230 V: 31.0 W – 0.32 A | |
1/8 of max output power @ 4 Ω | 115 V: 777 W – 7.0 A | 230 V: 753 W – 3.9 A | |
THERMAL | |||
Operating temperature range | 0° – 45° C – 32° – 113° F | ||
Thermal dissipation* | |||
Idle | 115 V: 103 BTU/h | 230 V: 106 BTU/h | |
1/8 of max output power @ 4 Ω | 115 V: 606 BTU/h | 230 V: 522 BTU/h |
SKU | Duecanali 4804 |
---|---|
Vikt (kg) | 9.000000 |
EAN | PF000461 |
Tillverkare | Powersoft |
Produktserie | Duecanali-serie |
Impedans | 2 Ohm, 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm, 70 Volt, 100 Volt |
Watt effekt | 2000w till 4999w |
Kraftbehov | 230V |
Power sharing | Ja |
Fläktlös | Nej |
- Duecanali 4804 DSP+DPowersoft Duecanali 4804-DSP-DANTE Förstärkare PRIS FRÅNVägl. Inkl. Moms Exkl. MomsDitt pris per Vägledande pris per inkl moms Exkl. Moms
Validate your login
Logga in
Skapa nytt konto