Powersoft T604 4ch Amplifier 1500W DSP-DANTE

6000W / 4-kanals högpresterande förstärkare med DSP och Dante ™

45000 Vägledande inkl moms
Ditt pris per Stk. Vägledande pris per Stk inkl moms Exkl. moms

Contact our expert about this product

The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.

MyPowersoft services are available for this product

  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía.
  • Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus

 

GENERAL
Output power per channel
Output power per channel 1500W @ 2 Ω 1500 W @ 4 Ω 1250 W @ 8 Ω
Bridge mode   3000 W @ 4 Ω 3000 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω     145 Vpeak
Current     50 Apeak
AC MAIN POWER
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement     100-240 V ±10%, 50-60 Hz
Operating voltage     90 V – 264 V
Power consumption / Current draw
1/8 of max output power @ 4 Ω   120 V: 1054 W – 9.5 A 230 V: 1027 W – 5.2 A
THERMAL
Thermal dissipation
1/8 of max output power @ 4 Ω   120 V: 1039 BTU/h 230 V: 944 BTU/h
Mer information
SKUT604
KontaktpersonMats Mattsson - mm@benum.com
Vikt (kg)10.000000
EnhetStk
EANPF00H475
FabrikantPowersoft
ProduktserieT-serie
TillkoplingDante
Dante compatibleNej

The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.

MyPowersoft services are available for this product

  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía.
  • Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus

 

GENERAL
Output power per channel
Output power per channel 1500W @ 2 Ω 1500 W @ 4 Ω 1250 W @ 8 Ω
Bridge mode   3000 W @ 4 Ω 3000 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω     145 Vpeak
Current     50 Apeak
AC MAIN POWER
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement     100-240 V ±10%, 50-60 Hz
Operating voltage     90 V – 264 V
Power consumption / Current draw
1/8 of max output power @ 4 Ω   120 V: 1054 W – 9.5 A 230 V: 1027 W – 5.2 A
THERMAL
Thermal dissipation
1/8 of max output power @ 4 Ω   120 V: 1039 BTU/h 230 V: 944 BTU/h
Mer information
SKUT604
KontaktpersonMats Mattsson - mm@benum.com
Vikt (kg)10.000000
EnhetStk
EANPF00H475
FabrikantPowersoft
ProduktserieT-serie
TillkoplingDante
Dante compatibleNej
From the same category
Powersoft Ottocanali 4K4 DSP-DANTE Förstärkare
Ottocanali 4K4 DSP+D
Powersoft Ottocanali 4K4 DSP-DANTE Förstärkare
Förväntad leveranstid: 90 dagar
PRIS FRÅN
60850 Vägledande inkl moms
Ditt pris per Stk. Vägledande pris per Stk inkl moms Exkl. moms
Benum representerar exklusivt flera av världens mest kända varumärken inom audio.