Tascam 4-Ch Analogue-Dante Conv. W. DSP Mixer XLR
Kontakta en produktexpert om denna produkt
The MM-4D/IN is an exquisite analogue input unit that converts four mic/line input signals into four Dante output signals. In addition, it also supports four-channel Dante input as well, making it possible to use virtually any audio sources within an established Dante network. Available with Euroblock (MM-4D/IN-E) or XLR (MM-4D/IN-X) connectors for analogue inputs, this model can be used for a wide range of applications.
The MM-4D/IN is part of the Tascam Dante Compact Processor Series consisting of compact, half-rack size audio converters for Dante/AES67 networks. The models easily add additional mic/line or AES/EBU inputs/outputs to Dante audio networks in public facilities, broadcasting stations, recording studios or upmarket domestic environment and can be freely combined.
A key advantage of the product range is the DSP processor built into each unit. By providing not only mixing functions and EQ but also dynamic processing, automatic level control, auto-ducking, routing and noise compensation, even small systems can fully perform without additional signal processing or mixing devices. From the input of microphone signals to the output of powered speakers or recording devices, the Dante Compact Processor Series can build up a complete small system on their own.
Remote control is possible via two different software applications available for Mac, Windows, iOS and Android devices: Tascam DCP Connect for configuration and Tascam EZ Connect for end users, both of which are simple to use and included with the units. The MM-4D/IN also offers the possibility to mute its inputs via GPI.
All models can be powered by PoE or an optional AC adapter. By using power daisy-chaining, two units mounted side-by-side in a rack can be powered by one AC adapter.
Dante Compact Processor Series overview
The series of our compact Dante interfaces includes the following models:
MM-4D/IN: 4-channel mic/line input
ML-4D/OUT: 4-channel line output
MM-2D: 2-channel mic/line input/output
AE-4D: AES/EBU 4-channel input/output
Specifications
| General | |
|---|---|
| Number of channels and formats | 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit |
| Audio inputs | |
|---|---|
| Analogue inputs (ANALOG IN) | MM-4D/IN-E: Balanced Euroblock connectors, 3.81 mm pitch MM-4D/IN-X: XLR connectors (XLR-3-31, 1: GND, 2: HOT, 3: COLD) |
| Minimum input level | –70 dBu |
| Maximum input level | +26 dBu |
| Input impedance | ≥2 kΩ |
| Note: 0 dBu equals 0.775 Vrms |
| Other inputs and outputs | |
|---|---|
| Dante/Ethernet connectors (DATA/DATA+PoE) | RJ-45 |
| Transmission protocol | Dante |
| Gigabit Ethernet standard | 1000BASE-T (IEEE 802.3ab) |
| Cable requirements | Cat 5e or better STP cables |
| External muting control (LED/SWITCH/GND, MM-4D/IN-E only) | Balanced Euroblock connectors, 3.81 mm pitch |
| LED connectors | |
| Output format | Open collector (10 Ω output impedance, 48 V withstand voltage, 35 mA maximum current) |
| Maximum output voltage for Low level | 0.5 V |
| SWITCH connectors | |
| Maximum input voltage | 5.5 V |
| Minimum input voltage for High level | 2.31 V |
| Maximum input voltage for Low level | 0.99 V |
| Audio performance | |
|---|---|
| Microphone input to Dante output | |
| Mic amp EIN (equivalent input noise) | ≤–125 dB (150 Ω, 22 kHz LPF, A-weighted, JEITA) |
| Frequency response | 20 Hz – 20 kHz, ±0.5 % (sampling frequency 44,1/48 kHz, JEITA) 20 Hz – 40 kHz, ±0.5 % (sampling frequency 88,2/96 kHz, JEITA) |
| Distortion (THD+N) | ≤0.003 % (−1 dBFS input, 44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| S/N ratio | ≥108 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Crosstalk | ≥100 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Dynamic range | ≥108 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Note: JEITA indicates compliance with JEITA CP-2150 |
| Power supply and other specifications | |
|---|---|
| Power supply | PoE class 0 Tascam PS-P1220E AC adapter (sold separately) |
| Power consumption | 7.5 W |
| Dimensions (W × H × D) | 214 mm × 45 mm × 136 mm (including protrusions) |
| Weight | 885 g |
| Permissible operating temperature range | 0–40 ºC |
| SKU | MM-4D-IN-X |
|---|---|
| Vikt (kg) | 0.885000 |
| Enhet | Stk |
| EAN | 4907034130856 |
| Tillverkare | Tascam |
| Produktserie | MM och ML serie |
| AoIP standard | Dante |
| Wordclock | Nej |
| Färg | Svart |
The MM-4D/IN is an exquisite analogue input unit that converts four mic/line input signals into four Dante output signals. In addition, it also supports four-channel Dante input as well, making it possible to use virtually any audio sources within an established Dante network. Available with Euroblock (MM-4D/IN-E) or XLR (MM-4D/IN-X) connectors for analogue inputs, this model can be used for a wide range of applications.
The MM-4D/IN is part of the Tascam Dante Compact Processor Series consisting of compact, half-rack size audio converters for Dante/AES67 networks. The models easily add additional mic/line or AES/EBU inputs/outputs to Dante audio networks in public facilities, broadcasting stations, recording studios or upmarket domestic environment and can be freely combined.
A key advantage of the product range is the DSP processor built into each unit. By providing not only mixing functions and EQ but also dynamic processing, automatic level control, auto-ducking, routing and noise compensation, even small systems can fully perform without additional signal processing or mixing devices. From the input of microphone signals to the output of powered speakers or recording devices, the Dante Compact Processor Series can build up a complete small system on their own.
Remote control is possible via two different software applications available for Mac, Windows, iOS and Android devices: Tascam DCP Connect for configuration and Tascam EZ Connect for end users, both of which are simple to use and included with the units. The MM-4D/IN also offers the possibility to mute its inputs via GPI.
All models can be powered by PoE or an optional AC adapter. By using power daisy-chaining, two units mounted side-by-side in a rack can be powered by one AC adapter.
Dante Compact Processor Series overview
The series of our compact Dante interfaces includes the following models:
MM-4D/IN: 4-channel mic/line input
ML-4D/OUT: 4-channel line output
MM-2D: 2-channel mic/line input/output
AE-4D: AES/EBU 4-channel input/output
Specifications
| General | |
|---|---|
| Number of channels and formats | 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit |
| Audio inputs | |
|---|---|
| Analogue inputs (ANALOG IN) | MM-4D/IN-E: Balanced Euroblock connectors, 3.81 mm pitch MM-4D/IN-X: XLR connectors (XLR-3-31, 1: GND, 2: HOT, 3: COLD) |
| Minimum input level | –70 dBu |
| Maximum input level | +26 dBu |
| Input impedance | ≥2 kΩ |
| Note: 0 dBu equals 0.775 Vrms |
| Other inputs and outputs | |
|---|---|
| Dante/Ethernet connectors (DATA/DATA+PoE) | RJ-45 |
| Transmission protocol | Dante |
| Gigabit Ethernet standard | 1000BASE-T (IEEE 802.3ab) |
| Cable requirements | Cat 5e or better STP cables |
| External muting control (LED/SWITCH/GND, MM-4D/IN-E only) | Balanced Euroblock connectors, 3.81 mm pitch |
| LED connectors | |
| Output format | Open collector (10 Ω output impedance, 48 V withstand voltage, 35 mA maximum current) |
| Maximum output voltage for Low level | 0.5 V |
| SWITCH connectors | |
| Maximum input voltage | 5.5 V |
| Minimum input voltage for High level | 2.31 V |
| Maximum input voltage for Low level | 0.99 V |
| Audio performance | |
|---|---|
| Microphone input to Dante output | |
| Mic amp EIN (equivalent input noise) | ≤–125 dB (150 Ω, 22 kHz LPF, A-weighted, JEITA) |
| Frequency response | 20 Hz – 20 kHz, ±0.5 % (sampling frequency 44,1/48 kHz, JEITA) 20 Hz – 40 kHz, ±0.5 % (sampling frequency 88,2/96 kHz, JEITA) |
| Distortion (THD+N) | ≤0.003 % (−1 dBFS input, 44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| S/N ratio | ≥108 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Crosstalk | ≥100 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Dynamic range | ≥108 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
| Note: JEITA indicates compliance with JEITA CP-2150 |
| Power supply and other specifications | |
|---|---|
| Power supply | PoE class 0 Tascam PS-P1220E AC adapter (sold separately) |
| Power consumption | 7.5 W |
| Dimensions (W × H × D) | 214 mm × 45 mm × 136 mm (including protrusions) |
| Weight | 885 g |
| Permissible operating temperature range | 0–40 ºC |
| SKU | MM-4D-IN-X |
|---|---|
| Vikt (kg) | 0.885000 |
| Enhet | Stk |
| EAN | 4907034130856 |
| Tillverkare | Tascam |
| Produktserie | MM och ML serie |
| AoIP standard | Dante |
| Wordclock | Nej |
| Färg | Svart |
Validate your login
Logga in
Skapa nytt konto