Ditt företags konto är spärrat och du kan inte lägga nya beställningar hos oss. Om du har frägor, vänligen kontakta accountingsweden@benum.com.
Powersoft
SKU
Duecanali 4804 DSP

Powersoft Duecanali 4804 DSP ONLY

4800W/2-channel Flexible Amplifier

Vägl. Inkl. Moms Exkl. Moms
Ditt pris per Stk Vägledande pris per Stk inkl moms Exkl. Moms

Kontakta en produktexpert om denna produkt

 Sales Installation Sverige-contact-image

Sales Installation Sverige

Mats / Daniel / Douglas
0734611595 / 0734611926 / 0734611924

sweden@benum.com 08207710 send email

Overview
The ability to implement any configuration with ease makes the Duecanali series extremely flexible. Powersoft’s legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum.

The Duecanali 4804 DSP is designed to work with Lo-Z (from 2 Ω ) and with 70V/100V distributed lines: any mixed impedance output loads can be realized.

A fully integrated state-of-the-art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions in unique Powersoft style, the DSP hardware and ArmoníaPlus software enable compliance with IEC 60849 for the crucial requirements of sound systems for emergency purposes.

MyPowersoft services are available for this product

Power supply
Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket

Protections
Fully protected circuit design with:

Ac protection: shut down power supply when AC mains voltage is outside the operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing the maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continuous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behavior

General
Fixed frequency switchmode output stage for high-grade sound accuracy
Compact size – all models only 1 RU for reduced rack cost and space
Lightweight – for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel

Loudspeaker system configuration
Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
Switchable 35Hz / 70Hz high pass filter per channel
Mixed configuration with Lo-Z/Hi-Z systems possible
Bridged mode low impedance per channel pair

Alarms and GPI/O
NC/NO contacts per channel for alarm notifications
Remote ON/OFF switch
Remote VCA control per channel

Digital Signal Processing

TI C6000 DSP platform
AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
Delay up to 100 ms for time alignment
Active DampingControl™ for cable compensation
Peak, RMS voltage, RMS current, TruePower™ limiters

Remote Control & Monitoring
Via Software:
Control and diagnostics monitoring via ArmoníaPlus
Dedicated WebApp
Via Hardware:

Attenuation (from 0dB to 26dB)
High-pass filters (35Hz, 70Hz)
Lo-Z/Hi-Z/70V/100V output selection
Adjustable gain (from 26dB to 35 dB)

 

 

GENERAL
Output power per Channel
Output power per Channel 3000 W @ 2 Ω 2400 W @ 4 Ω 1250 W @ 8 Ω
Bridge mode   6000 W @ 4 Ω 4800 W @ 8 Ω
Max output voltage / current
Maxunclipped output voltage @8 Ω     142 Vpeak
Current     80 Apeak
AC MAIN POWER
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement     100-240 V ±10%, 50-60 Hz
Operating voltage     90 V – 264 V
Power consumption /current draw
Idle   115 V: 32.5 W – 0.31 A 230 V: 32.8 W – 0.30 A
1/8 of max output power @ 4 Ω   115 V: 780 W – 7.0 A 230 V: 755 W – 3.9 A
THERMAL
Operating temperature range     0° – 45° C – 32° – 113° F
Thermal dissipation*
Idle   115 V: 111 BTU/h 230 V: 112 BTU/h
1/8 of max output power @ 4 Ω   115 V: 613 BTU/h 230 V: 528 BTU/h
 

 

 

Mer information
SKUDuecanali 4804 DSP
Vikt (kg)9.000000
EnhetStk
EANPF00D461
TillverkarePowersoft
ProduktserieDuecanali-serie
Impedans2 Ohm, 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm, 70 Volt, 100 Volt
Watt effekt2000w till 4999w
Kraftbehov230V
Power sharingJa
FläktlösNej

Overview
The ability to implement any configuration with ease makes the Duecanali series extremely flexible. Powersoft’s legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum.

The Duecanali 4804 DSP is designed to work with Lo-Z (from 2 Ω ) and with 70V/100V distributed lines: any mixed impedance output loads can be realized.

A fully integrated state-of-the-art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions in unique Powersoft style, the DSP hardware and ArmoníaPlus software enable compliance with IEC 60849 for the crucial requirements of sound systems for emergency purposes.

MyPowersoft services are available for this product

Power supply
Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket

Protections
Fully protected circuit design with:

Ac protection: shut down power supply when AC mains voltage is outside the operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing the maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continuous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behavior

General
Fixed frequency switchmode output stage for high-grade sound accuracy
Compact size – all models only 1 RU for reduced rack cost and space
Lightweight – for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel

Loudspeaker system configuration
Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
Switchable 35Hz / 70Hz high pass filter per channel
Mixed configuration with Lo-Z/Hi-Z systems possible
Bridged mode low impedance per channel pair

Alarms and GPI/O
NC/NO contacts per channel for alarm notifications
Remote ON/OFF switch
Remote VCA control per channel

Digital Signal Processing

TI C6000 DSP platform
AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
Delay up to 100 ms for time alignment
Active DampingControl™ for cable compensation
Peak, RMS voltage, RMS current, TruePower™ limiters

Remote Control & Monitoring
Via Software:
Control and diagnostics monitoring via ArmoníaPlus
Dedicated WebApp
Via Hardware:

Attenuation (from 0dB to 26dB)
High-pass filters (35Hz, 70Hz)
Lo-Z/Hi-Z/70V/100V output selection
Adjustable gain (from 26dB to 35 dB)

 

 

GENERAL
Output power per Channel
Output power per Channel 3000 W @ 2 Ω 2400 W @ 4 Ω 1250 W @ 8 Ω
Bridge mode   6000 W @ 4 Ω 4800 W @ 8 Ω
Max output voltage / current
Maxunclipped output voltage @8 Ω     142 Vpeak
Current     80 Apeak
AC MAIN POWER
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement     100-240 V ±10%, 50-60 Hz
Operating voltage     90 V – 264 V
Power consumption /current draw
Idle   115 V: 32.5 W – 0.31 A 230 V: 32.8 W – 0.30 A
1/8 of max output power @ 4 Ω   115 V: 780 W – 7.0 A 230 V: 755 W – 3.9 A
THERMAL
Operating temperature range     0° – 45° C – 32° – 113° F
Thermal dissipation*
Idle   115 V: 111 BTU/h 230 V: 112 BTU/h
1/8 of max output power @ 4 Ω   115 V: 613 BTU/h 230 V: 528 BTU/h
 

 

 

Mer information
SKUDuecanali 4804 DSP
Vikt (kg)9.000000
EnhetStk
EANPF00D461
TillverkarePowersoft
ProduktserieDuecanali-serie
Impedans2 Ohm, 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm, 70 Volt, 100 Volt
Watt effekt2000w till 4999w
Kraftbehov230V
Power sharingJa
FläktlösNej
Benum representerar exklusivt flera av världens mest kända varumärken inom audio.
Search engine powered by ElasticSuite