Powersoft Förstärkare X8 8CH ETH
8-channel Benchmarkförstärkare med DSP
Kontakta en produktexpert om denna produkt
Powersoft X8 förnyar och utvecklar hela konceptet med förstärkning tack vare integrationen av en världsomspännande kompatibel trefas strömförsörjning och en fullt utrustad DSP.
Det kompletta digitala ljudsignalhanteringssystemet baserat på ARM Cortex A-8-processor och TI C6000 DSP-plattformen förkunnar ny och innovativ nivå av signalbehandling, vilket ger icke-boolean routing och mixning, flerstegsutjämning med förhöjt cosinus, IIR och FIR-filter , delay upp till 2 sekunder vid ingångsbehandling och 100 ms för tidsjustering, förstärkning och polaritetsjustering, crossover, limiters, TruePower ™ -begränsare och Active DampingControl ™.
Strömförsörjningen tillåter världsomspännande AC-godkännande och direkt anslutning till alla regionala kraftledningskonfigurationer: den är nu lämplig för enfas-, tvåfas- eller trefasdrift från 85 VAC upp till 440 VAC utan behov av manuellt val. Sann trefas belastningsbalansering kan uppnås direkt av enheten utan någon komplex belastningstilldelning i kraftdistributionssystemets konstruktion.
MyPowersoft-tjänster finns tillgängliga för denna produkt
Power supply
Suitable for Single-Phase, Two-Phase or Three-Phase operation from 85 VAC up to 440 VAC, with automatic switching and balancing
Three-phase load balancing directly managed by the unit without the need for complex load assignments in the system design
Power Factor Correction PFC for low power consumption and compatibility with a wide range of voltages
Power limiters that eliminate the need for expensive power sequencers
Protections
Fully protected circuit design with:Innovative failure protection aimed at keeping the system on its SOA by detecting the power delivered to speakers compared to the power drawn from mains
Real-time measurement and processing of the output signal in order to obtain the power output: all data are collected and compared with data about the available stored energy and the power available from the mains. This makes the system immune from any misalignment such as overvoltage, overcurrent, short circuit, etc.
Protection against potentially harmful signals: DC, VHF, and clipping
General
Flexible routing/mixing provided by the internal 8x8 input/ output matrix, allows the user to mix and route analog and digital I/O.
8 input channels with physical analog and digital AES3 connectors and optional 16-in/8-out redundant Dante™ connection provides maximum flexibility.
Improved reliability thanks to the customizable input backup policy that automatically switches input source in case of a signal failure.
Complete user interface integrated into ArmoníaPlus.
WiFi remote monitoring through mobile device.
Settings
Non-boolean channel routing
Input signal backup policy aimed to improve reliability against signal fault
Signal grouping for speaker routing
Built-in remote management via WiFi
Monitoring
Hardware monitor available for fast local diagnostics
Load impedance measurement/display for each channel
Output power measurements/display for each channel
Mains voltage and current measurements/display
Digital Signal Processing
TI C6000 DSP platform architecture
AD/DA converter: dual 24bit @48 kHz Tandem® architecture, 127 dB dynamic range, per channel
Input/output independent equalizers per channel providing Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossovers: linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Input delay up to 2s and output delay up to 100ms for time alignment per channel
Active DampingControl™ for cable compensation
Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter
Remote management
Control and monitoring through ArmoníaPlus
Dedicated Web App
| GENERAL | |||
| Output power per channel | |||
| Output power per channel | 5200 W @ 2 Ω | 3000 W @ 4 Ω | 1600 W @ 8 Ω |
| Bridge mode | 10400 W @ 4 Ω | 6000 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped output voltage @8 Ω | 175 Vpeak | ||
| Current | 130 Apeak | ||
| AC MAIN POWER | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100 – 240 V @ 50/60Hz | ||
| Operating voltage | 90 V – 264 V | ||
| Power consumption | |||
| Idle | < 200 W | ||
| Max | < 5000 W | ||
| THERMAL | |||
| Operating temperature range | 0° – 45° C – 32° – 113° F | ||
| Thermal dissipation* | |||
| 1/8 of max output power @ 8 Ω | 115 V: 2117 BTU/h | 230 V: 1946 BTU/h | |
| 1/4 of max output power @ 8 Ω | 115 V: 3892 BTU/h | 230 V: 2875 BTU/h | |
| SKU | X8 DSP+ETH |
|---|---|
| Vikt (kg) | 28.000000 |
| EAN | PF000329 |
| Tillverkare | Powersoft |
| Produktserie | X-serie |
| Impedans | 2 Ohm, 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm |
| Kraftbehov | 230V |
| Power sharing | Ja |
| Fläktlös | Nej |
Powersoft X8 förnyar och utvecklar hela konceptet med förstärkning tack vare integrationen av en världsomspännande kompatibel trefas strömförsörjning och en fullt utrustad DSP.
Det kompletta digitala ljudsignalhanteringssystemet baserat på ARM Cortex A-8-processor och TI C6000 DSP-plattformen förkunnar ny och innovativ nivå av signalbehandling, vilket ger icke-boolean routing och mixning, flerstegsutjämning med förhöjt cosinus, IIR och FIR-filter , delay upp till 2 sekunder vid ingångsbehandling och 100 ms för tidsjustering, förstärkning och polaritetsjustering, crossover, limiters, TruePower ™ -begränsare och Active DampingControl ™.
Strömförsörjningen tillåter världsomspännande AC-godkännande och direkt anslutning till alla regionala kraftledningskonfigurationer: den är nu lämplig för enfas-, tvåfas- eller trefasdrift från 85 VAC upp till 440 VAC utan behov av manuellt val. Sann trefas belastningsbalansering kan uppnås direkt av enheten utan någon komplex belastningstilldelning i kraftdistributionssystemets konstruktion.
MyPowersoft-tjänster finns tillgängliga för denna produkt
Power supply
Suitable for Single-Phase, Two-Phase or Three-Phase operation from 85 VAC up to 440 VAC, with automatic switching and balancing
Three-phase load balancing directly managed by the unit without the need for complex load assignments in the system design
Power Factor Correction PFC for low power consumption and compatibility with a wide range of voltages
Power limiters that eliminate the need for expensive power sequencers
Protections
Fully protected circuit design with:Innovative failure protection aimed at keeping the system on its SOA by detecting the power delivered to speakers compared to the power drawn from mains
Real-time measurement and processing of the output signal in order to obtain the power output: all data are collected and compared with data about the available stored energy and the power available from the mains. This makes the system immune from any misalignment such as overvoltage, overcurrent, short circuit, etc.
Protection against potentially harmful signals: DC, VHF, and clipping
General
Flexible routing/mixing provided by the internal 8x8 input/ output matrix, allows the user to mix and route analog and digital I/O.
8 input channels with physical analog and digital AES3 connectors and optional 16-in/8-out redundant Dante™ connection provides maximum flexibility.
Improved reliability thanks to the customizable input backup policy that automatically switches input source in case of a signal failure.
Complete user interface integrated into ArmoníaPlus.
WiFi remote monitoring through mobile device.
Settings
Non-boolean channel routing
Input signal backup policy aimed to improve reliability against signal fault
Signal grouping for speaker routing
Built-in remote management via WiFi
Monitoring
Hardware monitor available for fast local diagnostics
Load impedance measurement/display for each channel
Output power measurements/display for each channel
Mains voltage and current measurements/display
Digital Signal Processing
TI C6000 DSP platform architecture
AD/DA converter: dual 24bit @48 kHz Tandem® architecture, 127 dB dynamic range, per channel
Input/output independent equalizers per channel providing Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossovers: linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Input delay up to 2s and output delay up to 100ms for time alignment per channel
Active DampingControl™ for cable compensation
Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter
Remote management
Control and monitoring through ArmoníaPlus
Dedicated Web App
| GENERAL | |||
| Output power per channel | |||
| Output power per channel | 5200 W @ 2 Ω | 3000 W @ 4 Ω | 1600 W @ 8 Ω |
| Bridge mode | 10400 W @ 4 Ω | 6000 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped output voltage @8 Ω | 175 Vpeak | ||
| Current | 130 Apeak | ||
| AC MAIN POWER | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100 – 240 V @ 50/60Hz | ||
| Operating voltage | 90 V – 264 V | ||
| Power consumption | |||
| Idle | < 200 W | ||
| Max | < 5000 W | ||
| THERMAL | |||
| Operating temperature range | 0° – 45° C – 32° – 113° F | ||
| Thermal dissipation* | |||
| 1/8 of max output power @ 8 Ω | 115 V: 2117 BTU/h | 230 V: 1946 BTU/h | |
| 1/4 of max output power @ 8 Ω | 115 V: 3892 BTU/h | 230 V: 2875 BTU/h | |
| SKU | X8 DSP+ETH |
|---|---|
| Vikt (kg) | 28.000000 |
| EAN | PF000329 |
| Tillverkare | Powersoft |
| Produktserie | X-serie |
| Impedans | 2 Ohm, 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm |
| Kraftbehov | 230V |
| Power sharing | Ja |
| Fläktlös | Nej |
-
X8 DSP+DPowersoft Förstärkare X8 8CH DANTE PRIS FRÅNVägl. Inkl. Moms Exkl. MomsDitt pris per Stk Vägledande pris per Stk inkl moms Exkl. Moms
Validate your login
Logga in
Skapa nytt konto