Powersoft Quattrocanali 2404 DSP-DANTE
2400W/4-kanals flexibel förstärkare med DSP och Dante™
Kontakta en produktexpert om denna produkt
Quattrocanali 2404 erbjuder både den traditionellt fantastiska ljudkvaliteten och tillförlitligheten som man finner hos alla Powersoft-produkter.
Den patenterade SRM-tekniken (Smart Rails Management) gör det möjligt att maximera systemets effektivitet och drastiskt minska strömförbrukningen i alla belastnings- och användningsförhållanden. Quattrocanali har den lägsta värmeavledningen i branschen, vilket minskar behovet av externa kylanordningar.
Quattrocanali är utformad för att fungera med Lo-Z (från 2 Ω) och 70V / 100V distribuerade linjer, eller någon blandning av de två.
Denna förstärkarplattform kan också lita på uppdragskritiska applikationer, såsom brandlarmsystem, tack vare den smart konstruerade strömförsörjningen som möjliggör tillförlitlig drift även när den är ansluten till en UPS.
MyPowersoft-tjänster finns tillgängliga för denna produkt
Power supply
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continuous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behavior
General
Fixed frequency switch-mode output stage for high grade sound accuracy
Compact size - all models only 1 RU for reduced rack cost and space
Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel
Settings
Built-in defeatable clip limiters for each channel
Digital gain-attenuator control
Defeatable gate selection for each channel
User selectable gain/sensitivity
User selectable maximum output power for each channel
User selectable maximum mains current draw
Lockable set-up by user selectable access key code
Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
Digital Signal Processing
TI C6000 DSP platform
AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
Delay up to 100 ms for time alignment
Active DampingControl™ for cable compensation
Peak, RMS voltage, RMS current, TruePower™ limiters
Remote Control and Monitoring
Via Software:Control and diagnostics monitoring via ArmoniaPlus
Dedicated WebApp
Via Hardware:Attenuation (from 0dB to 26dB)
High-pass filters (35Hz, 70Hz)
Lo-Z/Hi-Z/70V/100V output selection
Adjustable gain (from 26dB to 35 dB)
GENERAL | |||
Output power per Channel | |||
Output power per Channel | 800 W @ 2 Ω | 600 W @ 4 Ω | 600 W @ 8 Ω |
Bridge mode | 1600 W @ 4 Ω | 1200 W @ 8 Ω | |
Max output voltage / current | |||
Max unclipped voltage @8 | 100 Vpeak | ||
Current | 45 Apeak | ||
AC MAIN POWER | |||
Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
Operating voltage | 90 V – 264 V | ||
Power consumption/current draw | |||
Idle | 115 V: 31.1 W – 0.45 A | 230 V: 31.5 W – 0.25 A | |
1/8 of max output power @ 4 Ω | 115 V: 405 W – 2.1 A | 230 V: 405 W – 2.5 A | |
THERMAL | |||
Operating temperature range | 0° – 45° C – 32° – 113° F | ||
Thermal dissipation* | |||
Idle | 115 V: 106 BTU/h | 230 V: 107 BTU/h | |
1/8 of max output power @ 4 Ω | 115 V: 360 BTU/h | 230 V: 360 BTU/h |
SKU | Quattrocanali 2404 DSP+D |
---|---|
Vikt (kg) | 10.000000 |
Enhet | Stk |
EAN | PF00H464 |
Fabrikant | Powersoft |
Produktserie | Quattrocanali-serie |
Dante-kompatibel | Nej |
Quattrocanali 2404 erbjuder både den traditionellt fantastiska ljudkvaliteten och tillförlitligheten som man finner hos alla Powersoft-produkter.
Den patenterade SRM-tekniken (Smart Rails Management) gör det möjligt att maximera systemets effektivitet och drastiskt minska strömförbrukningen i alla belastnings- och användningsförhållanden. Quattrocanali har den lägsta värmeavledningen i branschen, vilket minskar behovet av externa kylanordningar.
Quattrocanali är utformad för att fungera med Lo-Z (från 2 Ω) och 70V / 100V distribuerade linjer, eller någon blandning av de två.
Denna förstärkarplattform kan också lita på uppdragskritiska applikationer, såsom brandlarmsystem, tack vare den smart konstruerade strömförsörjningen som möjliggör tillförlitlig drift även när den är ansluten till en UPS.
MyPowersoft-tjänster finns tillgängliga för denna produkt
Power supply
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continuous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behavior
General
Fixed frequency switch-mode output stage for high grade sound accuracy
Compact size - all models only 1 RU for reduced rack cost and space
Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel
Settings
Built-in defeatable clip limiters for each channel
Digital gain-attenuator control
Defeatable gate selection for each channel
User selectable gain/sensitivity
User selectable maximum output power for each channel
User selectable maximum mains current draw
Lockable set-up by user selectable access key code
Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
Digital Signal Processing
TI C6000 DSP platform
AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
Delay up to 100 ms for time alignment
Active DampingControl™ for cable compensation
Peak, RMS voltage, RMS current, TruePower™ limiters
Remote Control and Monitoring
Via Software:Control and diagnostics monitoring via ArmoniaPlus
Dedicated WebApp
Via Hardware:Attenuation (from 0dB to 26dB)
High-pass filters (35Hz, 70Hz)
Lo-Z/Hi-Z/70V/100V output selection
Adjustable gain (from 26dB to 35 dB)
GENERAL | |||
Output power per Channel | |||
Output power per Channel | 800 W @ 2 Ω | 600 W @ 4 Ω | 600 W @ 8 Ω |
Bridge mode | 1600 W @ 4 Ω | 1200 W @ 8 Ω | |
Max output voltage / current | |||
Max unclipped voltage @8 | 100 Vpeak | ||
Current | 45 Apeak | ||
AC MAIN POWER | |||
Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
Operating voltage | 90 V – 264 V | ||
Power consumption/current draw | |||
Idle | 115 V: 31.1 W – 0.45 A | 230 V: 31.5 W – 0.25 A | |
1/8 of max output power @ 4 Ω | 115 V: 405 W – 2.1 A | 230 V: 405 W – 2.5 A | |
THERMAL | |||
Operating temperature range | 0° – 45° C – 32° – 113° F | ||
Thermal dissipation* | |||
Idle | 115 V: 106 BTU/h | 230 V: 107 BTU/h | |
1/8 of max output power @ 4 Ω | 115 V: 360 BTU/h | 230 V: 360 BTU/h |
SKU | Quattrocanali 2404 DSP+D |
---|---|
Vikt (kg) | 10.000000 |
Enhet | Stk |
EAN | PF00H464 |
Fabrikant | Powersoft |
Produktserie | Quattrocanali-serie |
Dante-kompatibel | Nej |
Validate your login
Logga in
Skapa nytt konto