Powersoft Quattrocanali 8804 DSP-DANTE
9600W/4-kanals flexibel förstärkare med DSP och Dante™. Quattrocanali 8804 erbjuder både den traditionellt fantastiska ljudkvaliteten och tillförlitligheten som man finner hos alla Powersoft-produkter. Den patenterade SRM-tekniken (Smart Rails Management) gör det möjligt att maximera systemets effektivitet och drastiskt minska strömförbrukningen i alla belastnings- och användningsförhållanden. Quattrocanali har den lägsta värmeavledningen i branschen, vilket minskar behovet av externa kylanordningar.
Kontakta en produktexpert om denna produkt
Quattrocanali 8804 erbjuder både den traditionellt fantastiska ljudkvaliteten och tillförlitligheten som man finner hos alla Powersoft-produkter.
Den patenterade SRM-tekniken (Smart Rails Management) gör det möjligt att maximera systemets effektivitet och drastiskt minska strömförbrukningen i alla belastnings- och användningsförhållanden. Quattrocanali har den lägsta värmeavledningen i branschen, vilket minskar behovet av externa kylanordningar.
Quattrocanali är utformad för att fungera med Lo-Z (från 2 Ω) och 70V / 100V distribuerade linjer, eller någon blandning av de två.
Denna förstärkarplattform kan också lita på uppdragskritiska applikationer, såsom brandlarmsystem, tack vare den smart konstruerade strömförsörjningen som möjliggör tillförlitlig drift även när den är ansluten till en UPS.
MyPowersoft-tjänster finns tillgängliga för denna produkt
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
General
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
Settings
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User selectable gain/sensitivity
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Lockable set-up by user selectable access key code
- Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
Digital Signal Processing
- TI C6000 DSP platform
- AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
- Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
- Delay up to 100 ms for time alignment
- Active DampingControl™ for cable compensation
- Peak, RMS voltage, RMS current, TruePower™ limiters
Remote Control and Monitoring
Via Software:- Control and diagnostics monitoring via ArmoniaPlus
- Dedicated WebApp
- Attenuation (from 0dB to 26dB)
- High-pass filters (35Hz, 70Hz)
- Lo-Z/Hi-Z/70V/100V output selection
- Adjustable gain (from 26dB to 35 dB)
| GENERAL | |||
| Output power per Channel | |||
| Output power per Channel | 1800 W @ 2 Ω | 2400 W @ 4 Ω | 1600 W @ 8 Ω |
| Bridge mode | 3600 W @ 4 Ω | 4800 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped voltage @8 Ω | 175 Vpeak | ||
| Current | 55 Apeak | ||
| AC MAIN POWER | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V – 264 V | ||
| Power consumption/current draw | |||
| Idle | 115 V: 34 W – 0.56 A | 230 V: 34 W – 0.37 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 1702 W – 15.6 A | 230 V: 1676 W – 8.2 A | |
| THERMAL | |||
| Operating temperature range | 0° – 45° C – 32° – 113° F | ||
| Thermal dissipation | |||
| Idle | 115 V: 116 BTU/h | 230 V: 117 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 1713 BTU/h | 230 V: 1624 BTU/h | |
| SKU | Quattrocanali 8804 DSP+D |
|---|---|
| Vikt (kg) | 10.000000 |
| EAN | PF00H466 |
| Tillverkare | Powersoft |
| Produktserie | Quattrocanali-serie |
| Impedans | 2 Ohm, 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm, 70 Volt, 100 Volt |
| Watt effekt | 5000w till 10 000w |
| Kraftbehov | 230V |
| Power sharing | Ja |
| AoIP standard | Dante |
| Fläktlös | Nej |
Quattrocanali 8804 erbjuder både den traditionellt fantastiska ljudkvaliteten och tillförlitligheten som man finner hos alla Powersoft-produkter.
Den patenterade SRM-tekniken (Smart Rails Management) gör det möjligt att maximera systemets effektivitet och drastiskt minska strömförbrukningen i alla belastnings- och användningsförhållanden. Quattrocanali har den lägsta värmeavledningen i branschen, vilket minskar behovet av externa kylanordningar.
Quattrocanali är utformad för att fungera med Lo-Z (från 2 Ω) och 70V / 100V distribuerade linjer, eller någon blandning av de två.
Denna förstärkarplattform kan också lita på uppdragskritiska applikationer, såsom brandlarmsystem, tack vare den smart konstruerade strömförsörjningen som möjliggör tillförlitlig drift även när den är ansluten till en UPS.
MyPowersoft-tjänster finns tillgängliga för denna produkt
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
General
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
Settings
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User selectable gain/sensitivity
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Lockable set-up by user selectable access key code
- Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
Digital Signal Processing
- TI C6000 DSP platform
- AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
- Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
- Delay up to 100 ms for time alignment
- Active DampingControl™ for cable compensation
- Peak, RMS voltage, RMS current, TruePower™ limiters
Remote Control and Monitoring
Via Software:- Control and diagnostics monitoring via ArmoniaPlus
- Dedicated WebApp
- Attenuation (from 0dB to 26dB)
- High-pass filters (35Hz, 70Hz)
- Lo-Z/Hi-Z/70V/100V output selection
- Adjustable gain (from 26dB to 35 dB)
| GENERAL | |||
| Output power per Channel | |||
| Output power per Channel | 1800 W @ 2 Ω | 2400 W @ 4 Ω | 1600 W @ 8 Ω |
| Bridge mode | 3600 W @ 4 Ω | 4800 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped voltage @8 Ω | 175 Vpeak | ||
| Current | 55 Apeak | ||
| AC MAIN POWER | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V – 264 V | ||
| Power consumption/current draw | |||
| Idle | 115 V: 34 W – 0.56 A | 230 V: 34 W – 0.37 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 1702 W – 15.6 A | 230 V: 1676 W – 8.2 A | |
| THERMAL | |||
| Operating temperature range | 0° – 45° C – 32° – 113° F | ||
| Thermal dissipation | |||
| Idle | 115 V: 116 BTU/h | 230 V: 117 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 1713 BTU/h | 230 V: 1624 BTU/h | |
| SKU | Quattrocanali 8804 DSP+D |
|---|---|
| Vikt (kg) | 10.000000 |
| EAN | PF00H466 |
| Tillverkare | Powersoft |
| Produktserie | Quattrocanali-serie |
| Impedans | 2 Ohm, 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm, 70 Volt, 100 Volt |
| Watt effekt | 5000w till 10 000w |
| Kraftbehov | 230V |
| Power sharing | Ja |
| AoIP standard | Dante |
| Fläktlös | Nej |
Validate your login
Logga in
Skapa nytt konto