Tascam USB Audio-MIDI Interface With DSP Mixer-10 in 4 out
Kontakta en produktexpert om denna produkt
The compact SERIES 102i audio/MIDI interface is perfect for guitarists, songwriters and owners of small studios. It provides up to ten audio inputs and two audio outputs to a Mac or Windows computer or an iOS device, for recording and playback at up to 192 kHz / 24 bit and with the superb audio performance one expects from Tascam. Controllable with included custom software, this versatile USB interface is equipped with a powerful DSP input and output mixer with built-in digital reverb, compressor, phase invert and four-band EQ for each channel. Having this processor included internally eliminates all latency issues and takes the load off the computer allowing it to process the audio more efficiently. A new USB driver offers very high stability, ensuring reliable performance throughout all phases of your projects.
transparent, natural-sounding, low-noise Ultra-HDDA mic preamps and individually switchable phantom power (+48 volt). A maximum of ten inputs (four at 192 kHz) are available when using the multi-channel optical port which can accept up to eight channels of audio input from an ADAT- or S/MUX-compatible device. The SERIES 102i also offers dual headphone outputs with dedicated level control and two balanced 6.3-mm line outputs for versatile monitoring. And you can connect your favorite MIDI devices to the rear-panel MIDI input and output to use them with your recording software.
The angled tabletop design gives easy access to all front-panel controls. You can quickly adjust the monitor output level with a large front-panel Monitor knob, and use the handy Monitor Balance control to mix live input with computer playback for zero-latency overdubs.
- Provides up to ten audio inputs and two audio outputs to a Windows or Mac computer or iOS device
- Audio resolution up to 192 kHz / 24 bit
- USB Audio Compliance 2.0 for iOS connection
Hardware features
- Two analogue mic/line inputs on XLR/TRS balanced combo connectors
- High-grade Ultra-HDDA (High Definition Discrete Architecture) microphone pre-amps with ultra-low noise (EIN: –127 dBu)
- High-quality audio input circuits for low-noise recording
- Individually switchable 48-Volt phantom power on XLR inputs
- Each TRS input can be switched to instrument-level for direct recording of guitar or bass
- Gain controls, signal and peak indicators on each analogue input
- Optical multi-channel audio input for expansion by a maximum of eight additional
- inputsideally suited for use with the Tascam SERIES 8p Dyna microphone preamplifier
- S/MUX format with support for high sampling rates (ADAT-compatible)
- 8 inputs at 44.1/48 kHz
- 4 inputs at 88.2/96 kHz
- 2 inputs at 176.4/192 kHz - Two monitor/line outputs (balanced TRS) with level control
- Direct monitor option for low-latency monitoring
- Monitor mix control for adjusting the level balance between signals from external devices and signals from the computer
- Two 6.3-mm standard headphones outputs with level control (18 mW per channel)
MIDI input, MIDI output - Power supply by dedicated PS-P1220E AC adapter (included)
- Rugged all-metal chassis
Software features
- In-house developed driver for Windows devices ensures stable operation with low latency
- Built-in DSP with mixer, routing and effects accessible through dedicated settings panel
- Compressor and 4-band EQ with low-cut filter on each input channel
- Phase invert, Bypass, Solo, channel Link and Mute buttons on each input channel
- Four Aux sends, switchable pre/post (Aux 1 used for internal reverb)
- Reverb effect with five presets and adjustable pre delay, reverb time, diffusion and return level (Reverb can be used up to 96 kHz only)
- Master section with Stereo fader, Aux Master controls and Mute button
- Comfortable routing of output channels - Bundled with Cubase LE (64-bit Windows application), compatible with Cubasis LE
- Bundled with iZotope Neutron 3 Elements, AmpliTube and T-Racks plug-in effects
- Automatic update function available for software, driver and firmware updates
- Compatible with major DAW software (Pro Tools, Live, Cubase, Studio One, GarageBand etc.)
| SKU | SERIES 102i |
|---|---|
| Vikt (kg) | 1.714000 |
| Enhet | Stk |
| EAN | 4907034130979 |
| Tillverkare | Tascam |
| Färg | Svart |
The compact SERIES 102i audio/MIDI interface is perfect for guitarists, songwriters and owners of small studios. It provides up to ten audio inputs and two audio outputs to a Mac or Windows computer or an iOS device, for recording and playback at up to 192 kHz / 24 bit and with the superb audio performance one expects from Tascam. Controllable with included custom software, this versatile USB interface is equipped with a powerful DSP input and output mixer with built-in digital reverb, compressor, phase invert and four-band EQ for each channel. Having this processor included internally eliminates all latency issues and takes the load off the computer allowing it to process the audio more efficiently. A new USB driver offers very high stability, ensuring reliable performance throughout all phases of your projects.
transparent, natural-sounding, low-noise Ultra-HDDA mic preamps and individually switchable phantom power (+48 volt). A maximum of ten inputs (four at 192 kHz) are available when using the multi-channel optical port which can accept up to eight channels of audio input from an ADAT- or S/MUX-compatible device. The SERIES 102i also offers dual headphone outputs with dedicated level control and two balanced 6.3-mm line outputs for versatile monitoring. And you can connect your favorite MIDI devices to the rear-panel MIDI input and output to use them with your recording software.
The angled tabletop design gives easy access to all front-panel controls. You can quickly adjust the monitor output level with a large front-panel Monitor knob, and use the handy Monitor Balance control to mix live input with computer playback for zero-latency overdubs.
- Provides up to ten audio inputs and two audio outputs to a Windows or Mac computer or iOS device
- Audio resolution up to 192 kHz / 24 bit
- USB Audio Compliance 2.0 for iOS connection
Hardware features
- Two analogue mic/line inputs on XLR/TRS balanced combo connectors
- High-grade Ultra-HDDA (High Definition Discrete Architecture) microphone pre-amps with ultra-low noise (EIN: –127 dBu)
- High-quality audio input circuits for low-noise recording
- Individually switchable 48-Volt phantom power on XLR inputs
- Each TRS input can be switched to instrument-level for direct recording of guitar or bass
- Gain controls, signal and peak indicators on each analogue input
- Optical multi-channel audio input for expansion by a maximum of eight additional
- inputsideally suited for use with the Tascam SERIES 8p Dyna microphone preamplifier
- S/MUX format with support for high sampling rates (ADAT-compatible)
- 8 inputs at 44.1/48 kHz
- 4 inputs at 88.2/96 kHz
- 2 inputs at 176.4/192 kHz - Two monitor/line outputs (balanced TRS) with level control
- Direct monitor option for low-latency monitoring
- Monitor mix control for adjusting the level balance between signals from external devices and signals from the computer
- Two 6.3-mm standard headphones outputs with level control (18 mW per channel)
MIDI input, MIDI output - Power supply by dedicated PS-P1220E AC adapter (included)
- Rugged all-metal chassis
Software features
- In-house developed driver for Windows devices ensures stable operation with low latency
- Built-in DSP with mixer, routing and effects accessible through dedicated settings panel
- Compressor and 4-band EQ with low-cut filter on each input channel
- Phase invert, Bypass, Solo, channel Link and Mute buttons on each input channel
- Four Aux sends, switchable pre/post (Aux 1 used for internal reverb)
- Reverb effect with five presets and adjustable pre delay, reverb time, diffusion and return level (Reverb can be used up to 96 kHz only)
- Master section with Stereo fader, Aux Master controls and Mute button
- Comfortable routing of output channels - Bundled with Cubase LE (64-bit Windows application), compatible with Cubasis LE
- Bundled with iZotope Neutron 3 Elements, AmpliTube and T-Racks plug-in effects
- Automatic update function available for software, driver and firmware updates
- Compatible with major DAW software (Pro Tools, Live, Cubase, Studio One, GarageBand etc.)
| SKU | SERIES 102i |
|---|---|
| Vikt (kg) | 1.714000 |
| Enhet | Stk |
| EAN | 4907034130979 |
| Tillverkare | Tascam |
| Färg | Svart |
Validate your login
Logga in
Skapa nytt konto